INA118PB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | INA118 |
| Pin Count | 8 |
| Operating Supply Voltage | 36V |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 385μA |
| Max Supply Current | 385μA |
| Quiescent Current | 350μA |
| Slew Rate | 0.9V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 107 dB |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 800 kHz |
| Gain Bandwidth Product | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Voltage - Input Offset | 10μV |
| Gain | 10000 dB |
| -3db Bandwidth | 0.8MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.000005μA |
| Voltage Gain-Nom | 10 |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA118PB Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp ic of the Instrumentation type. Linear amplifier is delivered in a Tube case. It is estimated that there will be 8 terminations in the next few months. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 15V volts. An 8-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 50μV. This electronic part is recommended for mounting type Through Hole. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. You can run this op amp ic on 350μA . It is recommended to keep the voltage gain at 80dB at all times. There are a total of 1 channels available on the op amps. There are a total of 3 elements in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 36V voltage. There is a quiescent current of 350μA in this operational amplifier circuit. During testing, the instrumentation amplifier resistance should remain within a range of 10GOhm.
INA118PB Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm
INA118PB Applications
There are a lot of Texas Instruments INA118PB Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- earphone
- E-book readers
- Image computer boards
- Test and measurement instruments
- Power control
- Blood pressure sensors
- Ultrasound transducers
- Active probe
- Automotive sensors
