INA118UG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA118 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 385μA |
| Max Supply Current | 385μA |
| Quiescent Current | 350μA |
| Slew Rate | 0.9V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| -3db Bandwidth | 0.8MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.000005μA |
| Voltage Gain-Nom | 10 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA118UG4 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Instrumentation-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 8. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 15V volts. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 25μV. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureYou can run this op amp ic on 350μA . There should be no change in the voltage gain at 80dB. There are 1 circuits on this op amp. For the operating supply voltage of the op amp ic, there is a rating of 3. The current is quiescent at 350μA. 10GOhm is the range in which the op amp resistance should lie.
INA118UG4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm
INA118UG4 Applications
There are a lot of Texas Instruments INA118UG4 Instrumentational OP Amps applications.
- Test equipment
- Commercial audio systems
- Multiplication circuits
- MP3
- Division circuits
- Strain gauges
- Signal operation
- Comparator
- Professional videography
- Weighing systems
