INA121U/2K5G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1 TΩ |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA121 |
| Pin Count | 8 |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 450μA |
| Nominal Supply Current | 525μA |
| Quiescent Current | 450μA |
| Slew Rate | 0.7V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 96 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 14mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 600 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| -3db Bandwidth | 0.6MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 5e-7μA |
| Input Voltage Noise Density | 20nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.002% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA121U/2K5G4 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the Instrumentation-type. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. It consists of a total of 8 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. Linear amplifier includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 200μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 450μA can be used to operate this linear amplifier. It is a member of the 80dB's 80dB family. A linear amplifier like this has 1 circuits on it. There are a total of 3 elements in this linear amplifier. The linear amplifier is packaged by using a TR axis. 450μA quiescent currents are flowing through buffer op amp. 1 TΩ is the range in which the op amp resistance should lie.
INA121U/2K5G4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 1 TΩ
INA121U/2K5G4 Applications
There are a lot of Texas Instruments INA121U/2K5G4 Instrumentational OP Amps applications.
- Semiconductor detectors
- Displayers for aircraft and air transportation control systems
- Hand-held batteries
- Voltage regulation circuit
- Portable docking station
- Comparator
- Polarized electrodes
- Digital cameras
- Navigation
- Division circuits
