INA122PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA122 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 85μA |
| Max Supply Current | 85μA |
| Quiescent Current | 60μA |
| Slew Rate | 0.16V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~36V -0.9V/+1.3V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 120 kHz |
| Gain Bandwidth Product | 120 kHz |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Voltage - Input Offset | 150μV |
| -3db Bandwidth | 0.12MHz |
| Dual Supply Voltage | 9V |
| Input Offset Current-Max (IIO) | 0.005μA |
| Voltage Gain-Nom | 100 |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA122PA Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . As long as the supply current of the chip does not exceed 60μA, this op amp ic can operate. Maintain 80dB as the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. A total of 2 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. Currently, linear amplifier is operating with a quiescent current of 60μA. Instrumentation amplifier resistance should remain within the range of 10GOhm.
INA122PA Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm
INA122PA Applications
There are a lot of Texas Instruments INA122PA Instrumentational OP Amps applications.
- Ultrasound transducers
- Medical imaging
- Proportional operation circuits
- Integrator circuits
- Fission chambers
- Power transmission
- Professional videography
- Cinema or auditorium audio system
- Automation control systems
- High speed sample
