INA125PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA125 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Operating Supply Current | 460μA |
| Nominal Supply Current | 325μA |
| Quiescent Current | 460μA |
| Slew Rate | 0.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 150 kHz |
| Gain Bandwidth Product | 150 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Voltage - Input Offset | 50μV |
| -3db Bandwidth | 0.15MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.000005μA |
| Voltage Gain-Nom | 10 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA125PA Overview
Packaged in a 16-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. This is a Instrumentation type op amp. A Tube case is used for delivering the op amp. It is estimated that there will be at least 16 terminations this year. The pins on this board total to 16 in total. This linear amplifier should be powered by an 15V battery. In total, the buffer amplifier consists of 16 pins. Op amp rates 500μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 460μA . 80dB should remain the voltage gain. There are a total of 1 channels available on the op amps. There are a total of 2 elements in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. There is an 460μA quiescent current in linear amplifier. It is recommended to keep the instrumentation amplifier resistance within the range of 100GOhm.
INA125PA Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA125PA Applications
There are a lot of Texas Instruments INA125PA Instrumentational OP Amps applications.
- Commercial audio systems
- Industrial applications including automation
- Automatic control
- Portable media players
- PDA
- Signal transformation
- Image computer boards
- Video amplifiers
- single/dual op amp sum and difference circuits
- Cinema or auditorium audio system
