INA125PAG4
| Parameters | |
|---|---|
| Bandwidth | 150 kHz |
| Gain Bandwidth Product | 150 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Voltage - Input Offset | 50μV |
| -3db Bandwidth | 0.15MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.000005μA |
| Voltage Gain-Nom | 10 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA125 |
| Pin Count | 16 |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 460μA |
| Nominal Supply Current | 325μA |
| Quiescent Current | 460μA |
| Slew Rate | 0.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 500μV |
INA125PAG4 Overview
It is packaged in an 16-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 16. The pins on this board total to 16 in total. This linear amplifier should be powered by an 15V battery. An 16-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. This electrical part should be mounted using type Through Hole. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. You can run this op amp ic on 460μA . It is recommended to keep the voltage gain at 80dB at all times. The buffer amp consists of 1 circuits in total. There are 2 elements in this buffer amplifier. The quiescent current is 460μA. Op amp resistance should stay within the range of 100GOhm.
INA125PAG4 Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA125PAG4 Applications
There are a lot of Texas Instruments INA125PAG4 Instrumentational OP Amps applications.
- Television broadcasting equipment
- Logarithmic operation circuits
- Weak signal detection
- Digital cameras
- Video conversion and routing
- Precision measurement
- Proportional counter tubes
- Home audio systems
- Semiconductor detectors
- Image computer boards
