INA125PG4
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 460μA |
| Nominal Supply Current | 325μA |
| Quiescent Current | 460μA |
| Slew Rate | 0.02 V/μs |
| Amplifier Type | INSTRUMENTATION AMPLIFIER |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 25nA |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 150 kHz |
| Gain Bandwidth Product | 150 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 150 kHz |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 15V |
| Voltage Gain-Nom | 10 |
| Height | 4.57mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
INA125PG4 Overview
There is a PDIP case in which the instrumentation amplifier is packaged. This is a INSTRUMENTATION AMPLIFIER type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. In recent months, the number of terminations has approached 16. The pins on this board total to 16 in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Instrumentation Amplifier op amp ic can be identified by the fact that this is a type of Instrumentation Amplifier device. An 16-pin op amp ic is included in the package. The input offset voltage is 250μV. It is possible to operate this buffer amplifier from a supply current of 460μA . Voltage gain should remain at 80dB. As far as the device is concerned, buffer amplifier has 1 channels. It should not lower than -40°C to operate buffer amplifier. It is recommended that op amp be used at temperatures below 85°C. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 5V. The electrical part is capable of being powered by a voltage of under 36V, which means that it can be used with any voltage supply. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.7V, it is recommended to keep it higher. Conduct linear amplifier under the dual suuply voltage of 18V. As a result, linear amplifier's quiescent current is 460μA. Op amp resistance should stay within the range of 100GOhm.
INA125PG4 Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA125PG4 Applications
There are a lot of Texas Instruments INA125PG4 Instrumentational OP Amps applications.
- Portable docking station
- Hand-held batteries
- Gaming industry
- Logarithmic operation circuits
- Broadcasting
- Mobile phone
- Radar
- Commercial audio systems
- Image computer boards
- Test and measurement instruments
