INA128PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | INA128 |
| Pin Count | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Quiescent Current | 700μA |
| Slew Rate | 4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 1.3MHz |
| Gain Bandwidth Product | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Gain | 10000 dB |
| -3db Bandwidth | 1.3MHz |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Number of Amplifiers | 3 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.004% |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA128PA Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 15V. It has 8 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 25μV. Through Hole is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . An 700μA volt supply current is needed for this linear amplifier to operate. 80dB should remain the voltage gain. There are 1 circuits on op amps. 700μA quiescent currents are flowing through buffer op amp. During testing, the buffer amplifier resistance should remain within a range of 100GOhm. On the linear amplifier, there are 3 amplifiers.
INA128PA Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA128PA Applications
There are a lot of Texas Instruments INA128PA Instrumentational OP Amps applications.
- Wireless base stations
- Video conversion and routing
- Exponential operation circuits
- Industrial control system
- Laptop
- Blood pressure sensors
- Video data acquisition
- Switching amplifier
- Hand-held batteries
- Navigation
