INA128PG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | INA128 |
| Pin Count | 8 |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 750μA |
| Quiescent Current | 700μA |
| Slew Rate | 4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 10μV |
| Bandwidth | 1.3MHz |
| Gain Bandwidth Product | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| -3db Bandwidth | 1.3MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.005μA |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.002% |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA128PG4 Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. An op amp ic of the Instrumentation type. The op amp is delivered to you in a Tube case. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins on it. It is important to remember that this op amp should be operated at a voltage of 15V volts. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, op amp rates 10μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 700μA and 10 . There should be no change in the voltage gain at 80dB. This op amp contains 1 circuits. A voltage rating of 3 is indicated for the op amp's operating supply voltage. The quiescent current is 700μA. In order for the op amp resistance to remain within the 100GOhm range, the op amp should be tested.
INA128PG4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA128PG4 Applications
There are a lot of Texas Instruments INA128PG4 Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Image computer boards
- PDA
- Polarized electrodes
- ECG equipment
- Addition operation circuits
- Weak signal detection
- Communication device
- Medical instruments
- Radiation thermometry transducers
