INA128U
| Parameters | |
|---|---|
| Gain | 10000 dB |
| -3db Bandwidth | 1.3MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.005μA |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.002% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA128 |
| Pin Count | 8 |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Quiescent Current | 700μA |
| Slew Rate | 4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 10μV |
| Bandwidth | 1.3MHz |
| Gain Bandwidth Product | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.005μA |
INA128U Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 15V battery. The buffer op amp includes 8 pins. The input offset voltage is 10μV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. You can run this op amp ic on 700μA . There should be no change in the voltage gain. The op amp ic has 1 channels on it. The op amp is rated for an operating supply voltage of 3. The quiescent current is 700μA. It is recommended to keep the buffer amps resistance within the range of 100GOhm.
INA128U Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA128U Applications
There are a lot of Texas Instruments INA128U Instrumentational OP Amps applications.
- Vehicle electronics
- Precision measurement
- Proportional counter tubes
- E-book readers
- Industrial applications including automation
- Weighing systems
- Signal amplification
- Television
- Test equipment
- Power control
