INA128UA

1 Channels 15mA per Channel 2nA 110 dB Instrumentational OP Amps 0.005μA 4.5V~36V ±2.25V~18V INA128 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-INA128UA
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 864
Description: 1 Channels 15mA per Channel 2nA 110 dB Instrumentational OP Amps 0.005μA 4.5V~36V ±2.25V~18V INA128 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	75.891673mg
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
ECCN Code	EAR99
Resistance	100GOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Base Part Number	INA128
Pin Count	8
Number of Elements	3
Number of Channels	1
Operating Supply Current	700μA
Nominal Supply Current	700μA
Quiescent Current	700μA
Slew Rate	4V/μs
Amplifier Type	Instrumentation
Common Mode Rejection Ratio	110 dB
Current - Input Bias	2nA
Voltage - Supply, Single/Dual (±)	4.5V~36V ±2.25V~18V
Output Current per Channel	15mA
Input Offset Voltage (Vos)	25μV
Bandwidth	1.3MHz
Gain Bandwidth Product	1.3MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Voltage Gain	80dB
Average Bias Current-Max (IIB)	0.005μA
Gain	10000 dB
-3db Bandwidth	1.3MHz
Dual Supply Voltage	15V
Input Voltage Noise Density	8nV/sqrt Hz
Voltage Gain-Nom	10
Non-linearity-Max	0.004%
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

INA128UA Overview

It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Op amps are Instrumentation types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. It consists of a total of 8 pins in total. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. A total of 8 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 25μV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using a supply current of 700μA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 80dB. There are a total of 1 channels available on the op amps. A voltage rating of 3 is indicated for the op amp's operating supply voltage. There is a quiescent current of 700μA in this operational amplifier circuit. Linear amplifier resistance should stay within the range of 100GOhm.