INA128UA/2K5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA128 |
| Pin Count | 8 |
| Number of Circuits | 1 |
| Nominal Supply Current | 750μA |
| Quiescent Current | 700μA |
| Slew Rate | 4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 1.3MHz |
| Gain Bandwidth Product | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Voltage - Input Offset | 25μV |
| Current - Output / Channel | 15mA |
| -3db Bandwidth | 1.3MHz |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Number of Amplifiers | 3 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.004% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA128UA/2K5 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Instrumentation type. A Tape & Reel (TR) case is used for delivering the op amp. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 15V battery. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 125μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Keeping the voltage gain at 80dB is the best course of action. In total, there are 1 circuits on this buffer amplifier. TR is adopted to pack the instrumentation amplifier. The quiescent current is 700μA. 100GOhm should be the range of resistance for the linear amplifier. In total, there are 3 op amps on the device.
INA128UA/2K5 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA128UA/2K5 Applications
There are a lot of Texas Instruments INA128UA/2K5 Instrumentational OP Amps applications.
- Communication
- Digital cameras
- Displayers for aircraft and air transportation control systems
- Portable electronic products powered by batteries
- Measurements of Wheatstone bridge
- High gain DC amplifier
- Automatic control
- Voltage regulation circuit
- Ultrasound transducers
- Integrator circuits
