INA128UA/2K5E4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA128 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Nominal Supply Current | 750μA |
| Quiescent Current | 700μA |
| Slew Rate | 4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Voltage - Input Offset | 25μV |
| Current - Output / Channel | 15mA |
| -3db Bandwidth | 1.3MHz |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.004% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA128UA/2K5E4 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. This is a Instrumentation type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. Please take in mind that op amp should be run at 15V. 8 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 125μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. The voltage gain should stay at 80dB. This op amp contains 1 circuits. There are 3 elements in total in this linear amplifier. This linear amplifier pack is based on the TR axis. There is a quiescent current of 700μA in this operational amplifier circuit. Instrumentation amplifier resistance should remain within the range of 100GOhm.
INA128UA/2K5E4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA128UA/2K5E4 Applications
There are a lot of Texas Instruments INA128UA/2K5E4 Instrumentational OP Amps applications.
- PDA
- Thermocouples
- Multimedia playback equipment
- Subtraction operation circuits
- Mobile phone
- Automation control systems
- Power transmission
- Computer workstations
- Video data acquisition
- Measurements of Wheatstone bridge
