INA128UAE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA128 |
| Pin Count | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 750μA |
| Quiescent Current | 700μA |
| Slew Rate | 4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 1.3MHz |
| Gain Bandwidth Product | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Voltage - Input Offset | 25μV |
| -3db Bandwidth | 1.3MHz |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Number of Amplifiers | 3 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.004% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA128UAE4 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Instrumentation-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tube case. Buffer amplifier has a total of 8 pins on it. It is important to remember that this op amp should be operated at a voltage of 15V volts. It has 8 pins that make up the linear amplifier. Op amp rates 125μV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~125°C. As long as the supply current of the chip does not exceed 700μA, this op amp ic can operate. 80dB should be the voltage gain. There are 1 circuits on this op amp. There is an 700μA quiescent current in linear amplifier. Op amp resistance should stay within the range of 100GOhm. The buffer amplifier consists of 3 amplifiers.
INA128UAE4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA128UAE4 Applications
There are a lot of Texas Instruments INA128UAE4 Instrumentational OP Amps applications.
- Division circuits
- Video conversion and routing
- Communication
- Biopotential
- Logarithmic operation circuits
- Instrumentation
- Blood pressure sensors
- Addition operation circuits
- Commercial audio systems
- Power control
