banner_page

INA128UAG4

15mA per Channel 2nA 110 dB Instrumentational OP Amps 0.005μA 4.5V~36V ±2.25V~18V INA128 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA128UAG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 607
  • Description: 15mA per Channel 2nA 110 dB Instrumentational OP Amps 0.005μA 4.5V~36V ±2.25V~18V INA128 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Number of Terminations 8
ECCN Code EAR99
Resistance 100GOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Base Part Number INA128
Pin Count 8
Number of Elements 3
Number of Circuits 1
Operating Supply Current 700μA
Nominal Supply Current 750μA
Quiescent Current 700μA
Slew Rate 4V/μs
Amplifier Type Instrumentation
Common Mode Rejection Ratio 110 dB
Current - Input Bias 2nA
Voltage - Supply, Single/Dual (±) 4.5V~36V ±2.25V~18V
Output Current per Channel 15mA
Input Offset Voltage (Vos) 25μV
Bandwidth 1.3MHz
Neg Supply Voltage-Nom (Vsup) -15V
Voltage Gain 80dB
Average Bias Current-Max (IIB) 0.005μA
-3db Bandwidth 1.3MHz
Dual Supply Voltage 15V
Input Voltage Noise Density 8nV/sqrt Hz
Voltage Gain-Nom 10
Non-linearity-Max 0.004%
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 75.891673mg
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)

INA128UAG4 Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Instrumentation type. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 8 terminations in the next few months. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 15V battery. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 25μV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. As long as the supply current of the chip does not exceed 700μA, this op amp ic can operate. 80dB should be the voltage gain. There are 1 circuits on this op amp. A total of 3 elements are present in this linear amplifier. Buffer amplifier has a quiescent current of 700μA. During testing, the buffer amplifier resistance should remain within a range of 100GOhm.

INA128UAG4 Features


8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm

INA128UAG4 Applications


There are a lot of Texas Instruments INA128UAG4 Instrumentational OP Amps applications.

  • Multiplication circuits
  • Multimedia playback equipment
  • Signal filtering
  • Thermocouples
  • Automation control systems
  • Switching amplifier
  • Communication device
  • Biopotential
  • Ultrasound transducers
  • Weak signal detection

Write a review

Note: HTML is not translated!
    Bad           Good