INA129P

1 Channels 15mA per Channel 20nA 120 dB Instrumentational OP Amps 0.005μA 4.5V~36V ±2.25V~18V INA129 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-INA129P
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 910
Description: 1 Channels 15mA per Channel 20nA 120 dB Instrumentational OP Amps 0.005μA 4.5V~36V ±2.25V~18V INA129 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Weight	528.605208mg
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	100GOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Technology	BIPOLAR
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	2.54mm
Base Part Number	INA129
Pin Count	8
Number of Elements	3
Number of Channels	1
Operating Supply Current	700μA
Nominal Supply Current	750μA
Quiescent Current	700μA
Slew Rate	4V/μs
Amplifier Type	Instrumentation
Common Mode Rejection Ratio	120 dB
Current - Input Bias	20nA
Voltage - Supply, Single/Dual (±)	4.5V~36V ±2.25V~18V
Output Current per Channel	15mA
Input Offset Voltage (Vos)	50μV
Bandwidth	1.3MHz
Gain Bandwidth Product	1.3MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Voltage Gain	80dB
Average Bias Current-Max (IIB)	0.005μA
Voltage - Input Offset	10μV
-3db Bandwidth	1.3MHz
Dual Supply Voltage	15V
Input Offset Current-Max (IIO)	0.005μA
Input Voltage Noise Density	8nV/sqrt Hz
Voltage Gain-Nom	10
Non-linearity-Max	0.002%
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

INA129P Overview

There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. An op amp of this type is a Instrumentation-type. In the case of Tube cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. 8 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 50μV voltage. It is recommended that this electronic component be mounted using the Through Hole mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. You can run this op amp ic on 700μA . There should be no change in the voltage gain at 80dB. There are 1 channels on the operational amplifiers. Op amp has total of 3 elements. 700μA quiescent currents are flowing through buffer op amp. Linear amplifier resistance should stay within the range of 100GOhm.