INA129UA/2K5
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA129 |
| Pin Count | 8 |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 750μA |
| Quiescent Current | 700μA |
| Slew Rate | 4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 1.3MHz |
| Gain Bandwidth Product | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| -3db Bandwidth | 1.3MHz |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.004% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
INA129UA/2K5 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Instrumentation type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins on it. Please take in mind that op amp should be run at 15V. The buffer op amp includes 8 pins. In terms of input offset voltage, operational amplifier rates 25μV. This electronic part is best mounted with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 700μA and 10 . 80dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. There are a total of 3 elements in this linear amplifier. The instrumentation amplifier is packed in the form of TR. Currently, linear amplifier is operating with a quiescent current of 700μA. 100GOhm is the range in which the instrumentation amplifier resistance should lie.
INA129UA/2K5 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA129UA/2K5 Applications
There are a lot of Texas Instruments INA129UA/2K5 Instrumentational OP Amps applications.
- Polarized electrodes
- Inverse/same-phase proportional circuit
- Home audio systems
- Power control
- Subtraction operation circuits
- Differentiator circuits
- Communication
- Fission chambers
- Industrial applications including automation
- Micro signal measurement
