INA129UAE4.
| Parameters | |
|---|---|
| Slew Rate | 4 V/μs |
| Amplifier Type | INSTRUMENTATION AMPLIFIER |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 10nA |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 1.3MHz |
| Min Dual Supply Voltage | 2.25V |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Number of Amplifiers | 3 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.004% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Instrumentation Amplifier |
| Packing Method | TUBE |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 750μA |
| Quiescent Current | 700μA |
INA129UAE4. Overview
Packaging for the buffer amplifier is in the form of a SOIC case. An op amp ic of the INSTRUMENTATION AMPLIFIER type. Buffer amplifier has a total of 8 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Instrumentation Amplifier device. The buffer op amp includes 8 pins. Op amp rates 125μV as input offset voltage. Operational amplifier can operate supply current at 700μA. There should be no change in the voltage gain. Instrumentation amplifier has 1 channels on it. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. You should not use op amp above 125°C . TUBE is adopted to pack the instrumentation amplifier. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 36V, and this is an excellent feature. Over 4.5V is a recommended supply voltage for buffer ampsYou should conduct this electronic component under the dual supply voltage of 18V. There is an 700μA quiescent current in linear amplifier. It is important that the linear amplifier resistance stays within the range of 100GOhm. On the linear amplifier, there are 3 amplifiers.
INA129UAE4. Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA129UAE4. Applications
There are a lot of Texas Instruments INA129UAE4. Instrumentational OP Amps applications.
- Instrumentation
- Oscilloscopes
- Portable media players
- Non-polarized electrodes
- MP3
- Subtraction operation circuits
- Proportional operation circuits
- Signal filtering
- Logarithmic operation circuits
- Switching amplifier
