INA133UE4
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Pin Count | 8 |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 950μA |
| Nominal Supply Current | 950μA |
| Quiescent Current | 950μA |
| Slew Rate | 4.5 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 1.5MHz |
| Gain Bandwidth Product | 1.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 0dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 18V |
| Micropower | NO |
| -3db Bandwidth | 1.5MHz |
| Min Dual Supply Voltage | 2.25V |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Power | NO |
| Voltage Gain-Nom | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 50kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Packing Method | TUBE |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
INA133UE4 Overview
The linear amplifier is packaged in a SOIC case which makes it easy for the consumer to handle. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 8 terminations this year. In total, there are 8 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are included on the operational amplifiers. The input offset voltage is 750μV. You can run this op amp ic on 950μA . There should be no change in the voltage gain at 0dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. Use op amps only at temperatures no higher than 85°C. It is possible to count 1 elements on this buffer amplifier. The instrumentation amplifier is packed in the form of TUBE. This electric component can work from a voltage of under 36V as far as supply voltage is concerned. A voltage of 5V or higher is recommended for the linear amplifier's supply voltage. There should be a dual supply voltage of 18V for you to conduct this electrical part. Buffer amplifier has a quiescent current of 950μA. It is important that the linear amplifier resistance stays within the range of 50kOhm.
INA133UE4 Features
8 Pins
supply voltage of 5V
0dB voltage gain
Resistance of 50kOhm
INA133UE4 Applications
There are a lot of Texas Instruments INA133UE4 Instrumentational OP Amps applications.
- Integrator circuits
- Signal filtering
- Inverse/same-phase proportional circuit
- Cinema or auditorium audio system
- Blood pressure sensors
- Video computer boards
- Portable docking station
- Multimedia playback equipment
- Addition operation circuits
- Hand-held batteries
