INA145UA/2K5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA145 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 570μA |
| Nominal Supply Current | 700μA |
| Quiescent Current | 600μA |
| Slew Rate | 0.45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 50nA |
| Max Input Voltage | -2V |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 500 kHz |
| Gain Bandwidth Product | 50 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 93.98dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA145UA/2K5 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp of this type is a Differential-type. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 8 pins that make up the linear amplifier. Op amp rates 1mV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. A supply current of 570μA can be used to operate this linear amplifier. 60dB should remain the voltage gain. This op amp ic has 1 circuits. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. For the packing of the instrumentation amplifier, TR is adopted. The current is quiescent at 600μA. In order for the buffer amplifier resistance to remain within the 80kOhm range, the device should be tested.
INA145UA/2K5 Features
8 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 80kOhm
INA145UA/2K5 Applications
There are a lot of Texas Instruments INA145UA/2K5 Instrumentational OP Amps applications.
- Power control
- High input resistance broadband
- Automatic control
- pH (acidity)
- Video computer boards
- Television broadcasting equipment
- Semiconductor detectors
- Logarithmic operation circuits
- Communication device
- Ultrasound transducers
