INA152EA/2K5

2 Channels 12mA per Channel 80 dB Instrumentational OP Amps 2.7V~20V ±1.35V~10V INA152 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-INA152EA/2K5
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 685
Description: 2 Channels 12mA per Channel 80 dB Instrumentational OP Amps 2.7V~20V ±1.35V~10V INA152 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Thickness	970μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Weight	25.996513mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
ECCN Code	EAR99
Resistance	80kOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	10V
Terminal Pitch	0.65mm
Base Part Number	INA152
Pin Count	8
Number of Channels	2
Number of Circuits	1
Operating Supply Current	500μA
Nominal Supply Current	650μA
Quiescent Current	500μA
Slew Rate	0.4V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Differential
Common Mode Rejection Ratio	80 dB
Max Input Voltage	-2V
Voltage - Supply, Single/Dual (±)	2.7V~20V ±1.35V~10V
Output Current per Channel	12mA
Input Offset Voltage (Vos)	1.5mV
Bandwidth	800 kHz
Neg Supply Voltage-Nom (Vsup)	-10V
Voltage Gain	0dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	250μV
Micropower	YES
Programmable Power	NO
Power	NO
Voltage Gain-Nom	1
Height	1.07mm
Length	3mm
Width	3mm

INA152EA/2K5 Overview

There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the Differential-type. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape (CT) case. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 10V battery. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 1.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using a supply current of 500μA , this buffer op amp will be able to operate. The voltage gain should stay at 0dB. This op amp contains 1 circuits. As far as the device is concerned, buffer amplifier has 2 channels. The instrumentation amplifier is packed in the form of TR. There is an 500μA quiescent current running through op amp ic. Linear amplifier resistance should stay within the range of 80kOhm.