INA156EA/2K5

1pA 66 dB Instrumentational OP Amps 2.7V~5.5V INA156 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-INA156EA/2K5
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 620
Description: 1pA 66 dB Instrumentational OP Amps 2.7V~5.5V INA156 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Resistance	10 TΩ
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	INA156
Pin Count	8
Output Type	Rail-to-Rail
Number of Elements	2
Power Supplies	3/5V
Number of Circuits	1
Nominal Supply Current	2.5mA
Quiescent Current	1.8mA
Slew Rate	6.5V/μs
Amplifier Type	Instrumentation
Common Mode Rejection Ratio	66 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V
Input Offset Voltage (Vos)	8mV
Bandwidth	550 kHz
Gain Bandwidth Product	550 kHz
Voltage Gain	33.98dB
Power Supply Rejection Ratio (PSRR)	86.02dB
Supply Voltage Limit-Max	7.5V
Voltage - Input Offset	2.5mV
Current - Output / Channel	50mA
-3db Bandwidth	0.55MHz
Voltage Gain-Nom	10
Non-linearity-Max	0.03%
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Weight	25.996513mg
Operating Temperature	-55°C~125°C
Packaging	Tape & Reel (TR)

INA156EA/2K5 Overview

There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. This is a Instrumentation type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 8mV voltage. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -55°C~125°C for optimal performance. You should keep the voltage gain at 33.98dB for the time being. There are 1 circuits on this op amp. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. As a whole, there are 2 elements that make up this buffer amplifier. As a result of this, the buffer amplifier is packed in TR. The quiescent current is 1.8mA. It is important that the op amp resistance stays within the range of 10 TΩ.