INA159AIDGKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 26.506804mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 240kOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | INA159 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.5mA |
| Quiescent Current | 1.1mA |
| Slew Rate | 15V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 1.5MHz |
| Voltage Gain | 13.98dB |
| Power Supply Rejection Ratio (PSRR) | 93.98dB |
| Voltage - Input Offset | 100μV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA159AIDGKR Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. Please take in mind that op amp should be run at 5V. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . A supply current of 1.1mA can be used to operate this linear amplifier. 13.98dB should be the voltage gain. The buffer amp consists of 1 circuits in total. Buffer op amp is equipped with 2 channels on the device. 1.1mA quiescent currents are flowing through buffer op amp. It is recommended to keep the instrumentation amplifier resistance within the range of 240kOhm. The buffer op amp also uses a ANALOG CIRCUIT analog IC.
INA159AIDGKR Features
8 Pins
supply voltage of 5V
13.98dB voltage gain
Resistance of 240kOhm
INA159AIDGKR Applications
There are a lot of Texas Instruments INA159AIDGKR Instrumentational OP Amps applications.
- Large motor controllers
- Switching amplifier
- Communication
- Precision measurement
- Signal transformation
- Proportional operation circuits
- Thermocouples
- Car stereo
- Test equipment
- ECG equipment
