INA159AIDGKTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 26.506804mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 240kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | INA159 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.5mA |
| Quiescent Current | 1.1mA |
| Slew Rate | 15V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 1.5MHz |
| Gain Bandwidth Product | 1.5MHz |
| Voltage Gain | 13.98dB |
| Power Supply Rejection Ratio (PSRR) | 93.98dB |
| Voltage - Input Offset | 100μV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA159AIDGKTG4 Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. This is a Differential type op amp. The op amp is delivered to you in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. An 8-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 500μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Operational amplifier can operate supply current at 1.1mA. 13.98dB should be the voltage gain. A instrumentation amplifier like this has 1 circuits. On the buffer amps, there are 2 channels that can be used. Currently, linear amplifier is operating with a quiescent current of 1.1mA. Instrumentation amplifier resistance should stay within the range of 240kOhm. The other type of analog IC used in this op amp ic is known as ANALOG CIRCUIT.
INA159AIDGKTG4 Features
8 Pins
supply voltage of 5V
13.98dB voltage gain
Resistance of 240kOhm
INA159AIDGKTG4 Applications
There are a lot of Texas Instruments INA159AIDGKTG4 Instrumentational OP Amps applications.
- RF cable systems
- Automotive sensors
- Television
- earphone
- Scintillation detectors
- Automatic control
- Wireless base stations
- Band-pass filter
- Signal filtering
- High/low-pass filter circuit
