INA169NA/250G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | INA169 |
| Function | Current Monitor |
| Number of Elements | 1 |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 125μA |
| Voltage - Input | 2.7V~60V |
| Nominal Supply Current | 60μA |
| Accuracy | ±0.5% |
| Max Output Voltage | 40V |
| Amplifier Type | INSTRUMENTATION AMPLIFIER |
| Common Mode Rejection Ratio | 120 dB |
| Max Input Voltage | 60V |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 440 kHz |
| Unity Gain BW-Nom | 4400 kHz |
| -3db Bandwidth | 0.44MHz |
| Sensing Method | High-Side |
| Input Bias Current | 10μA |
| Voltage Gain-Min | 1 |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA169NA/250G4 Overview
There is a package called Tape & Reel (TR) that contains buck boost converter.In this case, voltage regulator has been packaged in the same way as SC-74A, SOT-753.Surface Mount is used to mount this current regulator on the board.Current regulator is recommended that the operating temperature not exceed -40°C~85°C.Current regulator supports the input voltage of 2.7V~60V.A 5 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 5 termination.In the INA169 family, current regulator is a member.When a computer or other communication constant current regulator has 5 pins, these are pronged contacts.This electronic part is mounted in the way of Surface Mount.It should work as long as it is powered by a 5VV power source. If it does not, it will not work.As long as 60V is supplied with the maximum voltage, it is supported.Part Operational Amplifier consists of these current regulations as well as other current regulations.In order to operate, it must be powered by a minimum voltage of 2.7V.The Amplifier type of this electrical buck boost converter is INSTRUMENTATION AMPLIFIER.It reaches 125μA when the operating supply current is supplied.Current regulation consists of 1 elements.As a result of its maximum input voltage, 60V has maximum design power converter flexibility.
INA169NA/250G4 Features
Tape & Reel (TR) package
INA169 family
The maximal supply voltage of 60V
1 elements
INA169NA/250G4 Applications
There are a lot of Texas Instruments INA169NA/250G4 Current Regulation/Managements applications.
- Level translating
- DC motor control
- Automotive current measurement
- Over current monitor
- Battery management
- Over-current measurement
- Programmable current source
- Smart battery packs
- Suspension controls
- Diesel injection controls
