INA193AIDBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | INA193 |
| Function | Current Monitor |
| Output Type | Voltage |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 900μA |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 700μA |
| Quiescent Current | 700μA |
| Accuracy | ±3% |
| Slew Rate | 1 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 400 kHz |
| Voltage Gain | 26.02dB |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Sensing Method | High-Side |
| Input Bias Current | 16μA |
| Number of Amplifiers | 1 |
| Height | 1.15mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA193AIDBVTG4 Overview
Buck boost converter is embedded in the Tape & Reel (TR) package.Depending on how SC-74A, SOT-753 packages voltage regulator, voltage regulator will be packaged in the same way.A mounting hole is provided for Surface Mount to mount this current regulator.A maximum operating temperature of -40°C~125°C should not be exceeded during operation.As an input voltage, you will be able to input a voltage equal to -16V~80V.As part of the INA193 family, current regulator belongs to this class.5-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.Supports the maximum supply voltage of 18V.Part Operational Amplifier consists of these current regulations as well as other current regulations.The buck boost converter operates with a minimum supply voltage of 2.7V.This electrical buck boost converter is an amplifier of type OPERATIONAL AMPLIFIER.When 900μA reaches, it receives its operating supply current.Essentially, current regulation is made up of 2 elements.In order to achieve a high efficiency level, it is essential that the supply voltage is kept at 15V.Current regulations have 26.02dB voltage gains, which are simple ratios between the output voltage and the input voltage.Regardless of external influence, it consumes 700μA of quiescent current.
INA193AIDBVTG4 Features
Tape & Reel (TR) package
INA193 family
The maximal supply voltage of 18V
2 elements
INA193AIDBVTG4 Applications
There are a lot of Texas Instruments INA193AIDBVTG4 Current Regulation/Managements applications.
- DC motor control
- Battery chargers
- Over-current protection
- Motor controls
- Power supply current measurement
- Engine management
- Industrial applications current measurement
- Current sensing
- Automotive current measurement
- Over-current measurement
