INA194AIDBVT
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | INA194 |
| Function | Current Monitor |
| Output Type | Voltage |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 900μA |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 700μA |
| Quiescent Current | 700μA |
| Accuracy | ±3% |
| Slew Rate | 1 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 300 kHz |
| Voltage Gain | 33.98dB |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Sensing Method | High-Side |
| Input Bias Current | 16μA |
| Number of Amplifiers | 1 |
| Voltage Gain-Nom | 50 |
| Common Mode Voltage-Max | 80V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
INA194AIDBVT Overview
There is an inclusion of buck boost converter in the package Cut Tape (CT).Depending on how SC-74A, SOT-753 packages voltage regulator, voltage regulator will be packaged in the same way.Surface Mount is used to mount this current regulator on the board.The operating temperature should not exceed -40°C~125°C.Voltages of -16V~80V can be input as input voltages in this module.INA194 family is associated with current regulator.5-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.As long as 18V is supplied with the maximum voltage, it is supported.There is a part called Operational Amplifier which contains all of these current regulations.In order for it to operate, 2.7V has to be the minimum supply voltage.Amplifier type OPERATIONAL AMPLIFIER can be found on this electrical buck boost converter.When 900μA reaches, it receives its operating supply current.Current regulation consists of 2 elements.In order to ensure high efficiency, the supply voltage should be maintained at 15V.There are 33.98dB voltage gains, which are?the simple ratio of the output voltage to the input voltage of a current regulation.Whatever the external influences, it consumes 700μA amperes of quiescent current.
INA194AIDBVT Features
Cut Tape (CT) package
INA194 family
The maximal supply voltage of 18V
2 elements
INA194AIDBVT Applications
There are a lot of Texas Instruments INA194AIDBVT Current Regulation/Managements applications.
- Battery management
- Suspension controls
- Smart battery packs
- Automotive current measurement
- Vehicle dynamic controls
- Industrial applications current measurement
- Programmable current source
- DC motor control
- Over current monitor
- Battery chargers
