INA194AQDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | INA194 |
| Function | Current Monitor |
| Output Type | Voltage |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 950μA |
| Quiescent Current | 370μA |
| Accuracy | ±3% |
| Slew Rate | 1 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 300 kHz |
| Voltage Gain | 33.98dB |
| Sensing Method | High-Side |
| Input Bias Current | 23μA |
| Voltage Gain-Nom | 50 |
| Common Mode Voltage-Max | 80V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA194AQDBVRQ1 Overview
There is an inclusion of buck boost converter in the package Tape & Reel (TR).A package in the way of SC-74A, SOT-753 is used for voltage regulator.Surface Mount mounts this current regulator.Temperatures should not exceed -40°C~125°C during operation.Current regulator supports the input voltage of -16V~80V.In addition to the 5 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.Current regulator belongs to INA194 family.Several pronged contacts are used in computer interfaces as 5 pins.The number of channels is growing strong/weak: 1.The maximum voltage of 18V that can be supplied to the buck boost converter is supported.As a result, these current regulations are included in a part called Operational Amplifier, which consists of these current regulations.In order to operate, it must be powered by a minimum voltage of 2.7V.These FPGAs belong to the Automotive, AEC-Q100 series.This electrical buck boost converter has a OPERATIONAL AMPLIFIER amplifier type.Essentially, current regulation is made up of 2 elements.A current regulation has 33.98dB voltage gains, which are simply a function of the input and output voltage between them.In spite of external influences, it consumes 370μA tones of quiescent current per second.
INA194AQDBVRQ1 Features
Tape & Reel (TR) package
INA194 family
The maximal supply voltage of 18V
Automotive, AEC-Q100 series
2 elements
INA194AQDBVRQ1 Applications
There are a lot of Texas Instruments INA194AQDBVRQ1 Current Regulation/Managements applications.
- Diesel injection controls
- Engine management
- Power management
- Power supply current measurement
- Current sensing
- Over current monitor
- Programmable current source
- Suspension controls
- Motor controls
- DC motor control
