INA195AIDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | INA195 |
| Function | Current Monitor |
| Output Type | Voltage |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 900μA |
| Voltage - Input | -16V~80V |
| Quiescent Current | 700μA |
| Accuracy | ±3% |
| Min Input Voltage | -16V |
| Slew Rate | 1 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Max Input Voltage | 80V |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 200 kHz |
| Voltage Gain | 40dB |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Sensing Method | High-Side |
| Input Bias Current | 16μA |
| Number of Amplifiers | 2 |
| Voltage Gain-Nom | 100 |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA195AIDBVR Overview
Package Tape & Reel (TR) includes buck boost converter.The package is in the form of SC-74A, SOT-753.Mounted by Surface Mount, this current regulator is a semiconductor.The operating temperature should not exceed -40°C~125°C.An input voltage wcurrent regulatorh a value of -16V~80V may be used as an input voltage.INA195 family is associated with current regulator.In a computer or other communication constant current regulator, 5 pins are pronged contacts that provide a signal interface.There is an increase/decrease in the number of channels: 1.The maximum supply voltage of 18V is supported by it.The current regulations of this part are included in a part that is named Operational Amplifier.As long as the supply voltage is lower than 2.7V, it will operate correctly.An amplifier of this type is OPERATIONAL AMPLIFIER.900μA represents the operating supply current supplied for its operation.As a result of the maximal input voltage of 80V, its design power converter flexibility is maximi80Ved.Current regulations have 40dB voltage gains, which are simply the ratio of output voltage to input voltage.As a result of its minimal input voltage, -16V is able to offer maximum design flexibility.In spite of external influences, it consumes 700μA of quiescent current regardless of the environment.
INA195AIDBVR Features
Tape & Reel (TR) package
INA195 family
The maximal supply voltage of 18V
INA195AIDBVR Applications
There are a lot of Texas Instruments INA195AIDBVR Current Regulation/Managements applications.
- Automotive current measurement
- Motor controls
- Vehicle dynamic controls
- Engine management
- Power supply current measurement
- Diesel injection controls
- Over current monitor
- Battery management
- Over-current measurement
- Over current monitor
