Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Surface Mount |
YES |
Number of Pins |
5 |
Weight |
17.491656mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Base Part Number |
INA195 |
Function |
Current Monitor |
Output Type |
Voltage |
Number of Elements |
2 |
Number of Channels |
1 |
Max Supply Voltage |
18V |
Min Supply Voltage |
2.7V |
Voltage - Input |
-16V~80V |
Nominal Supply Current |
1.05mA |
Quiescent Current |
370μA |
Accuracy |
±3% |
Slew Rate |
1 V/μs |
Amplifier Type |
OPERATIONAL AMPLIFIER |
Common Mode Rejection Ratio |
80 dB |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
200 kHz |
Voltage Gain |
40dB |
Sensing Method |
High-Side |
Input Bias Current |
23μA |
Voltage Gain-Nom |
100 |
Common Mode Voltage-Max |
80V |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
INA195AQDBVRQ1 Overview
In package Tape & Reel (TR), buck boost converter is included.Depending on how SC-74A, SOT-753 packages voltage regulator, voltage regulator will be packaged in the same way.Surface Mount is used to mount this current regulator on the board.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.As an input voltage, you will be able to input a voltage equal to -16V~80V.An example of this is the 5 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.Among the INA195 family of products.Computers and other communication constant current regulators use 5 pins, which are pronged contacts.Channels are becoming stronger/weaker based on the following statistics: 1.18V's maximum supply voltage can be supported by this buck boost converter.In order to include these current regulations, there is a part called Operational Amplifier that includes them.In order for it to operate, 2.7V has to be the minimum supply voltage.This type of FPGA is represented by the Automotive, AEC-Q100 series.This electrical buck boost converter has an amplifier type of OPERATIONAL AMPLIFIER, which is a type of amplifier.Current regulation consists of 2 elements.40dB voltage gains are the simple ratios of output voltage to input voltage in a current regulation.A quiescent current of 370μA consumes regardless of external influences.
INA195AQDBVRQ1 Features
Tape & Reel (TR) package
INA195 family
The maximal supply voltage of 18V
Automotive, AEC-Q100 series
2 elements
INA195AQDBVRQ1 Applications
There are a lot of Texas Instruments INA195AQDBVRQ1 Current Regulation/Managements applications.
- Automotive current measurement
- Smart battery packs
- Vehicle dynamic controls
- Power supply current measurement
- Battery management
- Current sensing
- DC motor control
- Over-current protection
- Over current monitor
- Motor controls