INA196AIDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | INA196 |
| Function | Current Monitor |
| Output Type | Voltage |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 900μA |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 700μA |
| Quiescent Current | 700μA |
| Accuracy | ±3% |
| Slew Rate | 1 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 500 kHz |
| Voltage Gain | 26.02dB |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Settling Time | 2 μs |
| Sensing Method | High-Side |
| Input Bias Current | 16μA |
| Number of Amplifiers | 1 |
| Voltage Gain-Nom | 20 |
| Common Mode Voltage-Max | 80V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA196AIDBVT Overview
The package includes buck boost converter in version Cut Tape (CT).In the same manner as SC-74A, SOT-753, voltage regulator is packaged.Surface Mount is used to mount this current regulator on the board.In order to maintain a safe operating environment, the temperature cannot exceed -40°C~125°C.Current regulator is possible to use a voltage of -16V~80V as an input voltage.There are two types of INA196s in this family.In a computer or other communication constant current regulator, 5 pins are pronged contacts that provide a signal interface.The maximum voltage of 18V that can be supplied to the buck boost converter is supported.This part is included in Operational Amplifier.In order for it to operate, 2.7V has to be the minimum supply voltage.An amplifying buck boost converter such as this one is a OPERATIONAL AMPLIFIER type amplifying buck boost converter.900μA is the operating supply current provided for its operation.There are a total of 2 elements in current regulation.High efficiency requires a voltage supply at 15V.In current regulations, 26.02dB voltage gains can be seen as a simple ratio of the output voltage to the input voltage.It consumes 700μA of quiescent current without being affected by external factors.
INA196AIDBVT Features
Cut Tape (CT) package
INA196 family
The maximal supply voltage of 18V
2 elements
INA196AIDBVT Applications
There are a lot of Texas Instruments INA196AIDBVT Current Regulation/Managements applications.
- Current sensing
- Vehicle dynamic controls
- Over current monitor
- DC motor control
- Battery management
- DC-to-dc converters
- Power supply current measurement
- Motor controls
- Over-current protection
- Industrial applications current measurement
