banner_page

INA197AIDBVRG4

5 Terminations5 Pin INA197 Current regulator-40°C~125°C Min 2.7V Max 18V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA197AIDBVRG4
  • Package: SC-74A, SOT-753
  • Datasheet: -
  • Stock: 488
  • Description: 5 Terminations5 Pin INA197 Current regulator-40°C~125°C Min 2.7V Max 18V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Surface Mount YES
Number of Pins 5
Weight 17.491656mg
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 5
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Base Part Number INA197
Function Current Monitor
Output Type Voltage
Number of Elements 2
Number of Channels 1
Max Supply Voltage 18V
Min Supply Voltage 2.7V
Voltage - Input -16V~80V
Nominal Supply Current 900μA
Quiescent Current 700μA
Accuracy ±3%
Slew Rate 1 V/μs
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 80 dB
Input Offset Voltage (Vos) 2mV
Bandwidth 300 kHz
Voltage Gain 33.98dB
Power Supply Rejection Ratio (PSRR) 106dB
Sensing Method High-Side
Input Bias Current 16μA
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

INA197AIDBVRG4 Overview


Buck boost converter is included in the package Tape & Reel (TR).A package in the way of SC-74A, SOT-753 is used for voltage regulator.In this case, Surface Mount holds the current regulator in place.There should be no temperature above -40°C~125°C at the time of operation.Current regulator is possible to use a voltage input of -16V~80V for the input.A 5 termination can be defined as a terminating voltage regulator which matches the characteristic impedance of a line, which allows a transmission line to be terminated with a voltage regulator matching its characteristic impedance.There are two types of INA197s in this family.In computers and other communication constant current regulators, 5 pins are pronged contacts that form part of a signal interface.Channels are becoming stronger/weaker based on the following statistics: 1.The maximum supply voltage of 18V is supported by it.As a result, these current regulations are included in a part called Operational Amplifier, which consists of these current regulations.This buck boost converter is designed to operate with a minimal supply voltage of 2.7V as its input voltage.The Amplifier type of this electrical buck boost converter is OPERATIONAL AMPLIFIER.Essentially, current regulation is made up of 2 elements.There are 33.98dB voltage gains, which are?the simple ratio of the output voltage to the input voltage of a current regulation.No matter what the external influences are, it will consume 700μA of quiescent current regardless of those influences.

INA197AIDBVRG4 Features


Tape & Reel (TR) package
INA197 family
The maximal supply voltage of 18V
2 elements

INA197AIDBVRG4 Applications


There are a lot of Texas Instruments INA197AIDBVRG4 Current Regulation/Managements applications.

  • Programmable current source
  • Over-current measurement
  • Battery management
  • DC motor control
  • Transmission controls
  • Engine management
  • Power supply current measurement
  • Diesel injection controls
  • Automotive current measurement
  • Current sensing

Write a review

Note: HTML is not translated!
    Bad           Good