INA197AIDBVT
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 300 kHz |
| Voltage Gain | 33.98dB |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Sensing Method | High-Side |
| Input Bias Current | 16μA |
| Number of Amplifiers | 1 |
| Voltage Gain-Nom | 50 |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | INA197 |
| Function | Current Monitor |
| Output Type | Voltage |
| Number of Elements | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 900μA |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 700μA |
| Quiescent Current | 700μA |
| Accuracy | ±3% |
| Min Input Voltage | -16V |
| Slew Rate | 1 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Max Input Voltage | 80V |
INA197AIDBVT Overview
Buck boost converter is included in the package Cut Tape (CT).In the way voltage regulator is packaged, voltage regulator is in the form of a SC-74A, SOT-753.A mounting hole is provided for Surface Mount to mount this current regulator.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.As an input voltage, you will be able to input a voltage equal to -16V~80V.Current regulator belongs to INA197 family.Computers or other communication constant current regulators have 5 pins, which are pronged contacts.18V's maximum supply voltage can be supported by this buck boost converter.There is a part called Operational Amplifier which contains all of these current regulations.In order for it to operate, 2.7V has to be the minimum supply voltage.This electrical buck boost converter has an amplifier type of OPERATIONAL AMPLIFIER, which is a type of amplifier.The operating supply current supplied for its operation reaches 900μA.2 elements make up this graph.80V offers maximum flexibility due to its maximum input voltage.33.98dB voltage gains represent the simple ratio of an output voltage to its input voltage.A minimal input voltage allows -16V to feature maximum design flexibility.Whatever the external influences, it consumes 700μA amperes of quiescent current.
INA197AIDBVT Features
Cut Tape (CT) package
INA197 family
The maximal supply voltage of 18V
2 elements
INA197AIDBVT Applications
There are a lot of Texas Instruments INA197AIDBVT Current Regulation/Managements applications.
- DC-to-dc converters
- Level translating
- Smart battery packs
- Power management
- Suspension controls
- Transmission controls
- Over current monitor
- Engine management
- Motor controls
- Current sensing
