INA197AQDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA197 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Output Type | Voltage |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 950μA |
| Quiescent Current | 370μA |
| Accuracy | ±3% |
| Slew Rate | 1 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 300 kHz |
| Voltage Gain | 33.98dB |
| Sensing Method | High-Side |
| Input Bias Current | 23μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA197AQDBVRQ1 Overview
Buck boost converter is included in the package Tape & Reel (TR).SC-74A, SOT-753 is the way in which voltage regulator is packaged.Surface Mount is used to mount this current regulator on the board.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage of -16V~80V as an input voltage.A 5 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 5 termination.In the INA197 family, current regulator is a member.Computers or other communication constant current regulators have 5 pins, which are pronged contacts.The number of channels is growing both strongly and weakly: 1.It supports the maximal supply voltage of 18V.The current regulations of this part are included in a part that is named Operational Amplifier.With the minimal supply voltage of 2.7V, it is capable of operating.The FPGAs in the Automotive, AEC-Q100 series belong to this category.This electrical buck boost converter has a OPERATIONAL AMPLIFIER amplifier type.In this case, current regulation consists of 2 elements.Current regulations have 33.98dB voltage gains, which are the ratio of output voltage to input voltage.There is no matter what external influences are present, it consumes 370μA of quiescent current.
INA197AQDBVRQ1 Features
Tape & Reel (TR) package
INA197 family
The maximal supply voltage of 18V
Automotive, AEC-Q100 series
2 elements
INA197AQDBVRQ1 Applications
There are a lot of Texas Instruments INA197AQDBVRQ1 Current Regulation/Managements applications.
- Industrial applications current measurement
- Power supply current measurement
- Power management
- Current sensing
- Suspension controls
- Transmission controls
- Over current monitor
- Over-current measurement
- Engine management
- Vehicle dynamic controls
