INA198AQDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | INA198 |
| Function | Current Monitor |
| Output Type | Voltage |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 1.05mA |
| Quiescent Current | 370μA |
| Accuracy | ±3% |
| Slew Rate | 1 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 200 kHz |
| Voltage Gain | 40dB |
| Sensing Method | High-Side |
| Input Bias Current | 23μA |
| Voltage Gain-Nom | 100 |
| Common Mode Voltage-Max | 80V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA198AQDBVRQ1 Overview
There is an inclusion of buck boost converter in the package Tape & Reel (TR).Voltage regulator is packaged in the way of SC-74A, SOT-753.A mounting hole is provided for Surface Mount to mount this current regulator.In order to maintain a safe operating environment, the temperature cannot exceed -40°C~125°C.The input voltage of -16V~80V can be supported by this voltage regulator.In the case of 5 terminations, which are the practice of terminating a transmission line with a voltage regulator that has the same characteristic impedance as the line itself, they are fairly common.Current regulator belongs to INA198 family.As part of a signal interface in a computer or other communication constant current regulator, 5 pins are pronged contacts.The number of channels is growing both strongly and weakly: 1.It supports the maximal supply voltage of 18V.There are several current regulations that are included in the Operational Amplifier part, which is part of the entire assembly.A minimum supply voltage of 2.7V is required for its operation.This type of FPGA is found in the Automotive, AEC-Q100 series.An amplifier of this type is OPERATIONAL AMPLIFIER.Current regulation consists of 2 elements.Current regulations have 40dB voltage gains, which are the ratio of output voltage to input voltage.In spite of external influences, it consumes 370μA of quiescent current regardless of the environment.
INA198AQDBVRQ1 Features
Tape & Reel (TR) package
INA198 family
The maximal supply voltage of 18V
Automotive, AEC-Q100 series
2 elements
INA198AQDBVRQ1 Applications
There are a lot of Texas Instruments INA198AQDBVRQ1 Current Regulation/Managements applications.
- Power management
- Industrial applications current measurement
- Over-current measurement
- Over current monitor
- Suspension controls
- DC-to-dc converters
- Power supply current measurement
- DC motor control
- Over-current protection
- Diesel injection controls
