INA199A1DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | INA199 |
| Function | Current Sense |
| Output Type | Voltage |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 65μA |
| Voltage - Input | -0.3V~26V |
| Nominal Supply Current | 115μA |
| Adjustable Threshold | NO |
| Accuracy | ±1.5% |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 5μV |
| Bandwidth | 80 kHz |
| Gain Bandwidth Product | 14 kHz |
| Supply Current-Max (Isup) | 5mA |
| Voltage Gain | 33.98dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 28μA |
| Input Voltage Noise Density | 25nV/sqrt Hz |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA199A1DCKT Overview
Package Tape & Reel (TR) includes buck boost converter.In this case, voltage regulator has been packaged in the same way as 6-TSSOP, SC-88, SOT-363.Current regulator is mounted by Surface Mount.There should be a limcurrent regulator to the operating temperature of -40°C~125°C.Voltages of -0.3V~26V can be input as input voltages in this module.6 terminations are a standard way of terminating transmission lines, in which a voltage regulator is used that matches the characteristic impedance of the line in order to terminate the transmission line.There are two types of INA199s in this family.There are 6 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. This electronic part is mounted in the way of Surface Mount.The supply voltage of this electrical constant current is 5V.The analog IC used by this power converter is called POWER SUPPLY SUPPORT CIRCUIT.In terms of channel number, I would say that it is growing strongly/weakly: 1.The maximum voltage of 26V that can be supplied to the buck boost converter is supported.In order to operate, it must be powered by a minimum voltage of 2.5V.When 65μA reaches, it receives its operating supply current.A maximum current supply (Isup) is supplied for its operation when the boost converter reaches its limit (5mA).There are 1 elements in current regulation.33.98dB voltage gains are the simple ratios of output voltage to input voltage in a current regulation.
INA199A1DCKT Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
1 elements
INA199A1DCKT Applications
There are a lot of Texas Instruments INA199A1DCKT Current Regulation/Managements applications.
- Level translating
- Motor controls
- Power management
- Industrial applications current measurement
- Over-current measurement
- Diesel injection controls
- Current sensing
- Programmable current source
- DC motor control
- Power supply current measurement
