INA199A1RSWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | INA199 |
| Function | Current Sense |
| Output Type | Voltage |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 65μA |
| Voltage - Input | -0.3V~26V |
| Nominal Supply Current | 115μA |
| Adjustable Threshold | NO |
| Accuracy | ±1.5% |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 14 kHz |
| Supply Current-Max (Isup) | 5mA |
| Voltage Gain | 33.98dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 28μA |
| Height | 550μm |
| Length | 1.8mm |
| Width | 1.4mm |
| Thickness | 450μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA199A1RSWR Overview
Package Tape & Reel (TR) includes buck boost converter.Voltage regulator is packaged in the way of 10-UFQFN.A mounting hole is provided for Surface Mount to mount this current regulator.The operating temperature should not exceed -40°C~125°C.The input voltage of -0.3V~26V can be supported by this voltage regulator.10 terminations are treated as terminations of transmission lines that use a voltage regulator with the characteristic impedance of the line as the means to terminate the transmission line.As part of the INA199 family, current regulator belongs to this class.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. This current regulator is mounted by Surface Mount.In order to make this constant current work, it needs to be powered by 5VV.This power converter uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.The number of channels is growing strong/weak: 1.26V's maximum supply voltage can be supported by this buck boost converter.A minimum supply voltage of 2.5V is required for its operation.When 65μA reaches, it receives its operating supply current.As soon as the maximum supply current (Isup) supplied for current regulation's operation reaches 5mA, it will cease to function.In this case, current regulation consists of 1 elements.In a current regulation, 33.98dB voltage gains are the simple ratio between the output voltage and the input voltage.
INA199A1RSWR Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
1 elements
INA199A1RSWR Applications
There are a lot of Texas Instruments INA199A1RSWR Current Regulation/Managements applications.
- Power supply current measurement
- Transmission controls
- Over-current protection
- Battery management
- Power management
- Smart battery packs
- Programmable current source
- Over current monitor
- Engine management
- Diesel injection controls
