INA199A1RSWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Weight | 10.007382mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | INA199 |
| Function | Current Sense |
| Output Type | Voltage |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 65μA |
| Voltage - Input | -0.3V~26V |
| Nominal Supply Current | 65μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Accuracy | ±1.5% |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 14 kHz |
| Gain Bandwidth Product | 14 kHz |
| Voltage Gain | 33.98dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 28μA |
| Height | 550μm |
| Length | 1.8mm |
| Width | 1.4mm |
| Thickness | 450μm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA199A1RSWT Overview
The package includes buck boost converter in version Tape & Reel (TR).Voltage regulator is packaged in the way of 10-UFQFN.Current regulator is mounted by Surface Mount.There should be a limcurrent regulator to the operating temperature of -40°C~125°C.Current regulator supports the input voltage of -0.3V~26V.As well as 10 terminations, there are also 10 terminations, which are the practice of terminating a transmission line with a voltage regulator that matches the characteristic impedance of the transmission line.In the INA199 family, current regulator is a member.Computers and other communication constant current regulators use 10 pins, which are pronged contacts.This current regulator is mounted by Surface Mount.Providing that it is powered by a 5VV power supply, the constant current should work without any problems.This power converter employs an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Strong/weak growth of channels: 1.The maximum supply voltage of 26V is supported by it.This buck boost converter is designed to operate with a minimal supply voltage of 2.7V as its input voltage.This boost converter is supplied with an operating supply current of 65μA for its operation.In terms of current regulator's design flexibility, 100μA features a maximum supply current.A current regulation has 33.98dB voltage gains, which are simply a function of the input and output voltage between them.
INA199A1RSWT Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
INA199A1RSWT Applications
There are a lot of Texas Instruments INA199A1RSWT Current Regulation/Managements applications.
- Smart battery packs
- Vehicle dynamic controls
- Level translating
- Suspension controls
- Power supply current measurement
- Industrial applications current measurement
- Transmission controls
- Motor controls
- Automotive current measurement
- DC motor control
