INA199A2DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | INA199 |
| Function | Current Sense |
| Output Type | Voltage |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 65μA |
| Voltage - Input | -0.3V~26V |
| Nominal Supply Current | 115μA |
| Adjustable Threshold | NO |
| Accuracy | ±1.5% |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 5μV |
| Bandwidth | 30 kHz |
| Gain Bandwidth Product | 14 kHz |
| Supply Current-Max (Isup) | 5mA |
| Voltage Gain | 40dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 28μA |
| Input Voltage Noise Density | 25nV/sqrt Hz |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA199A2DCKR Overview
Buck boost converter is embedded in the Tape & Reel (TR) package.Depending on how 6-TSSOP, SC-88, SOT-363 packages voltage regulator, voltage regulator will be packaged in the same way.This electronic part is mounted in the way of Surface Mount.There should be a limcurrent regulator to the operating temperature of -40°C~125°C.There is a support for voltages of -0.3V~26V as input voltages for this voltage regulator.6 terminations are a standard way of terminating transmission lines, in which a voltage regulator is used that matches the characteristic impedance of the line in order to terminate the transmission line.In the INA199 family, current regulator is a member.6-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.There is a Surface Mount mounting bracket on the back of this current regulator.If a 5VV power source is used as a power source to power the constant current, it should be able to function.The analog IC used in this power converter is POWER SUPPLY SUPPORT CIRCUIT.Strong/weak growth of channels: 1.A maximum supply voltage of 26V can be supported by it.As a result, it operates at the minimal supply voltage of 2.7V.It reaches 65μA when the operating supply current is supplied for its operation.A maximum current supply (Isup) is supplied for its operation when the boost converter reaches its limit (5mA).A current regulation has 40dB voltage gains, which are simply a function of the input and output voltage between them.
INA199A2DCKR Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
INA199A2DCKR Applications
There are a lot of Texas Instruments INA199A2DCKR Current Regulation/Managements applications.
- Power supply current measurement
- Power management
- Industrial applications current measurement
- Current sensing
- Smart battery packs
- DC motor control
- Over-current measurement
- Transmission controls
- Battery management
- Programmable current source
