INA199A2DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | INA199 |
| Function | Current Sense |
| Output Type | Voltage |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 65μA |
| Voltage - Input | -0.3V~26V |
| Nominal Supply Current | 115μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Accuracy | ±1.5% |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 5μV |
| Bandwidth | 30 kHz |
| Gain Bandwidth Product | 14 kHz |
| Voltage Gain | 40dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 28μA |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA199A2DCKT Overview
There is an inclusion of buck boost converter in the package Tape & Reel (TR).oltage regulator is packaged in such a way that 6-TSSOP, SC-88, SOT-363 would understand.Mounted by Surface Mount, this current regulator is a semiconductor.A maximum operating temperature of -40°C~125°C should not be exceeded during operation.Voltages of -0.3V~26V can be input as input voltages in this module.A 6 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 6 termination.Among the INA199 family of products.In computers and other communications constant current regulators, 6 pins are pronged contacts that form part of a signal interface.Using Surface Mount as a mounting system, this current regulator is mounted.Providing that it is powered by a 5VV power supply, the constant current should work without any problems.Analog IC POWER SUPPLY SUPPORT CIRCUIT is used in this power converter.Strong/weak growth of channels: 1.The maximum voltage of 26V that can be supplied to the buck boost converter is supported.In order for it to operate, 2.7V has to be the minimum supply voltage.During its operation, 65μA is reached by the operating supply current.The maximal supply current of 100μA makes it feature maximum current regulator's design flexibility.40dB voltage gains are the simple ratios of output voltage to input voltage in a current regulation.
INA199A2DCKT Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
INA199A2DCKT Applications
There are a lot of Texas Instruments INA199A2DCKT Current Regulation/Managements applications.
- Over-current protection
- Over current monitor
- Over current monitor
- Over-current measurement
- Current sensing
- DC-to-dc converters
- Transmission controls
- Industrial applications current measurement
- DC motor control
- Suspension controls
