Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
10-UFQFN |
Number of Pins |
10 |
Weight |
10.007382mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position |
QUAD |
Supply Voltage |
5V |
Terminal Pitch |
0.4mm |
Base Part Number |
INA199 |
Function |
Current Sense |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
26V |
Min Supply Voltage |
2.7V |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Operating Supply Current |
65μA |
Voltage - Input |
-0.3V~26V |
Nominal Supply Current |
65μA |
Max Supply Current |
100μA |
Adjustable Threshold |
NO |
Accuracy |
±1.5% |
Slew Rate |
0.4 V/μs |
Common Mode Rejection Ratio |
100 dB |
Input Offset Voltage (Vos) |
150μV |
Bandwidth |
14 kHz |
Gain Bandwidth Product |
14 kHz |
Voltage Gain |
40dB |
Power Supply Rejection Ratio (PSRR) |
140dB |
Sensing Method |
High/Low-Side |
Input Bias Current |
28μA |
Height |
550μm |
Length |
1.8mm |
Width |
1.4mm |
Thickness |
450μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
INA199A2RSWT Overview
In package Tape & Reel (TR), buck boost converter is included.A package in the way of 10-UFQFN is used for voltage regulator.The current regulator is mounted by Surface Mount.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.Current regulator is possible to use a voltage of -0.3V~26V as an input voltage.10 terminations are a standard way of terminating transmission lines, in which a voltage regulator is used that matches the characteristic impedance of the line in order to terminate the transmission line.This is a member of the INA199 family.Several pronged contacts are used in computer interfaces as 10 pins.It is mounted by Surface Mount on this current regulator.As long as the constant current is powered by a 5VV power source, it should work as long as it is plugged in.This power converter utiliPOWER SUPPLY SUPPORT CIRCUITes an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT.A significant number of channels are growing strongly/weakly: 1.A maximum supply voltage of 26V can be supported by it.With the minimal supply voltage of 2.7V, it is capable of operating.This boost converter is supplied with an operating supply current of 65μA for its operation.As 100μA has a maximal supply current, its current regulator's design flexibility is maximi100μAed.In a current regulation, 40dB voltage gains are the simple ratio between the output voltage and the input voltage.
INA199A2RSWT Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
INA199A2RSWT Applications
There are a lot of Texas Instruments INA199A2RSWT Current Regulation/Managements applications.
- Level translating
- Diesel injection controls
- Over-current measurement
- Engine management
- Vehicle dynamic controls
- Power management
- Current sensing
- Power supply current measurement
- Automotive current measurement
- Suspension controls