INA199A3DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | INA199 |
| Function | Current Sense |
| Output Type | Voltage |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 65μA |
| Voltage - Input | -0.3V~26V |
| Nominal Supply Current | 115μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Accuracy | ±1.5% |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 14 kHz |
| Voltage Gain | 46.02dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 28μA |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA199A3DCKT Overview
There is an inclusion of buck boost converter in the package Tape & Reel (TR).In the way voltage regulator is packaged, voltage regulator is in the form of a 6-TSSOP, SC-88, SOT-363.A mounting hole is provided for Surface Mount to mount this current regulator.Temperatures should not exceed -40°C~125°C during operation.As far as input voltage goes, current regulator supports the value of -0.3V~26V.As well as 6 terminations, there are also 6 terminations, which are the practice of terminating a transmission line with a voltage regulator that matches the characteristic impedance of the transmission line.INA199 family is associated with current regulator.As part of a signal interface in a computer or other communication constant current regulator, 6 pins are pronged contacts.Surface Mount is responsible for mounting this current regulator.In order to make this constant current work, it needs to be powered by 5VV.The analog IC used in this power converter is POWER SUPPLY SUPPORT CIRCUIT.The number of channels is growing strong/weak: 1.As long as 26V is supplied with the maximum voltage, it is supported.In order to operate, it must be powered by a minimum voltage of 2.5V.During its operation, 65μA is reached by the operating supply current.There are a total of 1 elements in current regulation.As a result of the maximum supply current of 100μA, maximum current regulator's design flexibility is possible.In a current regulation, 46.02dB voltage gains are the simple ratio between the output voltage and the input voltage.
INA199A3DCKT Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
1 elements
INA199A3DCKT Applications
There are a lot of Texas Instruments INA199A3DCKT Current Regulation/Managements applications.
- Programmable current source
- Smart battery packs
- Battery chargers
- Over-current measurement
- Industrial applications current measurement
- Vehicle dynamic controls
- Over current monitor
- Diesel injection controls
- Over-current protection
- Automotive current measurement
