INA199A3RSWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Weight | 10.007382mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | INA199 |
| Function | Current Sense |
| Output Type | Voltage |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 65μA |
| Voltage - Input | -0.3V~26V |
| Nominal Supply Current | 65μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Accuracy | ±1.5% |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 14 kHz |
| Gain Bandwidth Product | 14 kHz |
| Voltage Gain | 46.02dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 28μA |
| Height | 550μm |
| Length | 1.8mm |
| Width | 1.4mm |
| Thickness | 450μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA199A3RSWT Overview
Buck boost converter is included in the package Tape & Reel (TR).Voltage regulator is packaged in the way of 10-UFQFN.This electronic part is mounted in the way of Surface Mount.A maximum operating temperature of -40°C~125°C should not be exceeded during operation.Voltages of -0.3V~26V can be input as input voltages in this module.An example of this is the 10 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.Current regulator belongs to INA199 family.When a computer or other communication constant current regulator has 10 pins, these are pronged contacts.Using Surface Mount as a mounting system, this current regulator is mounted.It should work as long as it is powered by a 5VV power source. If it does not, it will not work.IC POWER SUPPLY SUPPORT CIRCUIT is the power converter's analog IC.Channels are becoming stronger/weaker based on the following statistics: 1.There is a maximum voltage to be supplied to 26V by it.With the minimum supply voltage of 2.7V, it is able to operate.It reaches 65μA when the operating supply current is supplied for its operation.As 100μA has a maximal supply current, its current regulator's design flexibility is maximi100μAed.Current regulations have 46.02dB voltage gains, which are simple ratios between the output voltage and the input voltage.
INA199A3RSWT Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
INA199A3RSWT Applications
There are a lot of Texas Instruments INA199A3RSWT Current Regulation/Managements applications.
- Over-current measurement
- Automotive current measurement
- Over current monitor
- Vehicle dynamic controls
- Over-current protection
- Level translating
- Engine management
- Suspension controls
- Motor controls
- Programmable current source
