INA199B1DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Zero-Drift |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | INA199 |
| Function | Current Sense |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 65μA |
| Voltage - Input | -0.1V~26V |
| Nominal Supply Current | 115μA |
| Adjustable Threshold | NO |
| Accuracy | ±1.5% |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 80 kHz |
| Supply Current-Max (Isup) | 5mA |
| Voltage Gain | 33.98dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 28μA |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA199B1DCKR Overview
Buck boost converter is part of the package Tape & Reel (TR).A package in the way of 6-TSSOP, SC-88, SOT-363 is used for voltage regulator.Current regulator is mounted by Surface Mount.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.The input voltage of -0.1V~26V can be supported by this voltage regulator.There are 6 terminations, which are the practice of ending a transmission line with a voltage regulator that matches the characteristic impedance of the line.Among the INA199 family of products.Several pronged contacts are used in computer interfaces as 6 pins.This electronic part is mounted in the way of Surface Mount.It should work as long as it is powered by a 5VV power source. If it does not, it will not work.Analog IC POWER SUPPLY SUPPORT CIRCUIT is used in this power converter.There is an increase/decrease in the number of channels: 1.A maximum supply voltage of 26V can be supported by it.As long as the supply voltage is lower than 2.5V, it will operate correctly.A type of FPGA that falls under this category is the Zero-Drift series.It reaches 65μA when the operating supply current is supplied for its operation.It reaches 5mA when the maximum supply current (Isup) is supplied to it for current regulation's operation.In this case, current regulation consists of 1 elements.There are 33.98dB voltage gains, which are?the simple ratio of the output voltage to the input voltage of a current regulation.
INA199B1DCKR Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
Zero-Drift series
1 elements
INA199B1DCKR Applications
There are a lot of Texas Instruments INA199B1DCKR Current Regulation/Managements applications.
- Suspension controls
- Industrial applications current measurement
- Battery chargers
- Engine management
- Programmable current source
- DC-to-dc converters
- DC motor control
- Current sensing
- Over current monitor
- Over-current measurement
