INA199B1DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Zero-Drift |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | INA199 |
| Function | Current Sense |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 65μA |
| Voltage - Input | -0.1V~26V |
| Adjustable Threshold | NO |
| Accuracy | ±1.5% |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 80 kHz |
| Supply Current-Max (Isup) | 5mA |
| Voltage Gain | 33.98dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 28μA |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA199B1DCKT Overview
There is a package called Tape & Reel (TR) that contains buck boost converter.Voltage regulator is packaged in the way of 6-TSSOP, SC-88, SOT-363.Surface Mount mounts this current regulator.In order to maintain a safe operating environment, the temperature cannot exceed -40°C~125°C.Current regulator is possible to use a voltage of -0.1V~26V as an input voltage.There are 6 terminations, which are the practice of ending a transmission line with a voltage regulator that matches the characteristic impedance of the line.Among the INA199 family of products.Several pronged contacts are used in computer interfaces as 6 pins.An current regulator such as this one is mounted by Surface Mount.The constant current should work as long as it is powered by a 5VV power source, and therefore must be plugged into a 5VV outlet.This power converter employs an analog IC called POWER SUPPLY SUPPORT CIRCUIT.There is a strong/weak growth in the number of channels: 1.It supports the maximal supply voltage of 26V.This buck boost converter is designed to operate with a minimal supply voltage of 2.5V as its input voltage.An example of this type of FPGA is the Zero-Drift series.It reaches 65μA when the operating supply current is supplied for its operation.The maximum amount of supply current (Isup) required for it to operate reaches a value of 5mA.There are a total of 1 elements in current regulation.33.98dB voltage gains are the simple ratios of output voltage to input voltage in a current regulation.
INA199B1DCKT Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
Zero-Drift series
1 elements
INA199B1DCKT Applications
There are a lot of Texas Instruments INA199B1DCKT Current Regulation/Managements applications.
- Diesel injection controls
- Vehicle dynamic controls
- Smart battery packs
- Power management
- Battery management
- Suspension controls
- Power supply current measurement
- Engine management
- Current sensing
- Over current monitor
