INA199B2DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Zero-Drift |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | INA199 |
| Function | Current Sense |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 65μA |
| Voltage - Input | -0.1V~26V |
| Adjustable Threshold | NO |
| Accuracy | ±1.5% |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 30 kHz |
| Supply Current-Max (Isup) | 5mA |
| Voltage Gain | 40dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 28μA |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 125°C |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA199B2DCKR Overview
Included in package Tape & Reel (TR) is this file.A package in the way of 6-TSSOP, SC-88, SOT-363 is used for voltage regulator.Mounted by Surface Mount, this current regulator is a semiconductor.The operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage of -0.1V~26V as an input voltage.6 terminations are treated as terminations of transmission lines that use a voltage regulator with the characteristic impedance of the line as the means to terminate the transmission line.As part of the INA199 family, current regulator belongs to this class.In computers and other communication constant current regulators, 6 pins are pronged contacts that form part of a signal interface.It is mounted on a Surface Mount-axis by this current regulator.Providing the constant current is powered by a 5VV power source, the constant current should be able to function.The analog IC used in this power converter is POWER SUPPLY SUPPORT CIRCUIT.The number of channels is growing both strongly and weakly: 1.The maximum voltage of 26V that can be supplied to the buck boost converter is supported.This buck boost converter is designed to operate with a minimal supply voltage of 2.5V as its input voltage.The FPGAs in the Zero-Drift series belong to this category.65μA is the operating supply current provided for its operation.The maximal supply current (Isup) supplied for current regulation's operation reaches 5mA.There are 1 elements in current regulation.Current regulations have 40dB voltage gains, which are the ratio of output voltage to input voltage.
INA199B2DCKR Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
Zero-Drift series
1 elements
INA199B2DCKR Applications
There are a lot of Texas Instruments INA199B2DCKR Current Regulation/Managements applications.
- DC motor control
- Power management
- Transmission controls
- Smart battery packs
- DC-to-dc converters
- Over current monitor
- Over-current measurement
- Over current monitor
- Programmable current source
- Engine management
