banner_page

INA199B2DCKT

6 Terminations5V 6 Pin INA199 Current regulatorZero-Drift Series -40°C~125°C Min 2.5V Max 26V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA199B2DCKT
  • Package: 6-TSSOP, SC-88, SOT-363
  • Datasheet: -
  • Stock: 506
  • Description: 6 Terminations5V 6 Pin INA199 Current regulatorZero-Drift Series -40°C~125°C Min 2.5V Max 26V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-TSSOP, SC-88, SOT-363
Number of Pins 6
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series Zero-Drift
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 6
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 5V
Base Part Number INA199
Function Current Sense
Number of Elements 1
Number of Channels 1
Max Supply Voltage 26V
Min Supply Voltage 2.5V
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Operating Supply Current 65μA
Voltage - Input -0.1V~26V
Adjustable Threshold NO
Accuracy ±1.5%
Slew Rate 0.4 V/μs
Common Mode Rejection Ratio 100 dB
Input Offset Voltage (Vos) 150μV
Gain Bandwidth Product 14 kHz
Supply Current-Max (Isup) 5mA
Voltage Gain 40dB
Power Supply Rejection Ratio (PSRR) 140dB
Sensing Method High/Low-Side
Input Bias Current 28μA
Height 1.1mm
Length 2mm
Width 1.25mm
Thickness 900μm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

INA199B2DCKT Overview


Including buck boost converter in package Tape & Reel (TR) is a good idea.Voltage regulator is packaged in the way of 6-TSSOP, SC-88, SOT-363.There is a Surface Mount mounted on this current regulator.There should be no temperature above -40°C~125°C at the time of operation.Current regulator is possible to use a voltage input of -0.1V~26V for the input.As well as 6 terminations, there are also 6 terminations, which are the practice of terminating a transmission line with a voltage regulator that matches the characteristic impedance of the transmission line.There are two types of INA199s in this family.6-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.In this example, the current regulator has been mounted using Surface Mount.The supply voltage of this electrical constant current is 5V.Analog IC POWER SUPPLY SUPPORT CIRCUIT is used in this power converter.The number of channels is growing both strongly and weakly: 1.26V's maximum supply voltage can be supported by this buck boost converter.This buck boost converter is designed to operate with a minimal supply voltage of 2.5V as its input voltage.The Zero-Drift series of FPGAs fall into this category.When 65μA reaches, it receives its operating supply current.When 5mA is reached, the maximum number of supply currents (Isup) are supplied for current regulation's operation.A 1-element consists of current regulation.In current regulations, 40dB voltage gains can be seen as a simple ratio of the output voltage to the input voltage.

INA199B2DCKT Features


Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
Zero-Drift series
1 elements

INA199B2DCKT Applications


There are a lot of Texas Instruments INA199B2DCKT Current Regulation/Managements applications.

  • Battery management
  • Suspension controls
  • Motor controls
  • Current sensing
  • Diesel injection controls
  • Over-current protection
  • DC-to-dc converters
  • Engine management
  • Battery chargers
  • Industrial applications current measurement

Write a review

Note: HTML is not translated!
    Bad           Good