Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-TSSOP, SC-88, SOT-363 |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Zero-Drift |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Supply Voltage |
5V |
Base Part Number |
INA199 |
Function |
Current Sense |
Number of Elements |
1 |
Number of Channels |
1 |
Max Supply Voltage |
26V |
Min Supply Voltage |
2.5V |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Operating Supply Current |
65μA |
Voltage - Input |
-0.1V~26V |
Adjustable Threshold |
NO |
Accuracy |
±1.5% |
Slew Rate |
0.4 V/μs |
Common Mode Rejection Ratio |
100 dB |
Input Offset Voltage (Vos) |
150μV |
Gain Bandwidth Product |
14 kHz |
Supply Current-Max (Isup) |
5mA |
Voltage Gain |
46.02dB |
Power Supply Rejection Ratio (PSRR) |
140dB |
Sensing Method |
High/Low-Side |
Input Bias Current |
28μA |
Height |
1.1mm |
Length |
2mm |
Width |
1.25mm |
Thickness |
900μm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
INA199B3DCKT Overview
Included in package Tape & Reel (TR) is this file.A package in the way of 6-TSSOP, SC-88, SOT-363 is used for voltage regulator.In this case, Surface Mount holds the current regulator in place.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.There is a support for voltages of -0.1V~26V as input voltages for this voltage regulator.In addition to the 6 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.As part of the INA199 family, current regulator belongs to this class.6-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.In this example, the current regulator has been mounted using Surface Mount.Providing the constant current is powered by a 5VV power source, the constant current should be able to function.POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this power converter employs.There is an increase/decrease in the number of channels: 1.There is a maximum voltage to be supplied to 26V by it.As long as the supply voltage is lower than 2.5V, it will operate correctly.These FPGAs belong to the Zero-Drift series.65μA represents the operating supply current supplied for its operation.It reaches 5mA when the maximum supply current (Isup) is supplied to it for current regulation's operation.Current regulation consists of 1 elements.There are 46.02dB voltage gains, which are?the simple ratio of the output voltage to the input voltage of a current regulation.
INA199B3DCKT Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
Zero-Drift series
1 elements
INA199B3DCKT Applications
There are a lot of Texas Instruments INA199B3DCKT Current Regulation/Managements applications.
- Transmission controls
- DC motor control
- Smart battery packs
- Over-current measurement
- Vehicle dynamic controls
- Battery management
- Diesel injection controls
- DC-to-dc converters
- Battery chargers
- Programmable current source