INA200AID
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Base Part Number | INA200 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1.85mA |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 1.35mA |
| Max Supply Current | 1.8mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 500 kHz |
| Sensing Method | High-Side |
| Input Bias Current | 9μA |
| Number of Amplifiers | 1 |
| Voltage Gain-Nom | 20 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
INA200AID Overview
Buck boost converter is included in the package Tube.Voltage regulator is packaged in the way of 8-SOIC (0.154, 3.90mm Width).Current regulator is mounted by Surface Mount.The operating temperature should not exceed -40°C~125°C.The input voltage of -16V~80V is supported as an input voltage.There is a INA200 family member who is related to current regulator.Computers or other communication constant current regulators have 8 pins, which are pronged contacts.This current regulator is mounted by Surface Mount.Providing that it is powered by a 12VV power supply, the constant current should work without any problems.It supports the maximal supply voltage of 18V.There is a part called Operational Amplifier which contains all of these current regulations.As long as the supply voltage is lower than 2.7V, it will operate correctly.The Amplifier type of this electrical buck boost converter is COMPARATOR.This boost converter is supplied with an operating supply current of 1.85mA for its operation.The maximal supply current of 1.8mA allows for maximum current regulator's design flexibility.
INA200AID Features
Tube package
INA200 family
The maximal supply voltage of 18V
INA200AID Applications
There are a lot of Texas Instruments INA200AID Current Regulation/Managements applications.
- Engine management
- Automotive current measurement
- Level translating
- Industrial applications current measurement
- DC motor control
- Battery chargers
- Current sensing
- Programmable current source
- Battery management
- Power management
