Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Weight |
26.506804mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
12V |
Terminal Pitch |
0.65mm |
Base Part Number |
INA200 |
Function |
Current Monitor |
Output Type |
OPEN-DRAIN |
Operating Supply Voltage |
12V |
Number of Channels |
1 |
Max Supply Voltage |
18V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
1.85mA |
Voltage - Input |
-16V~80V |
Max Supply Current |
5mA |
Accuracy |
±3.5% |
Response Time |
1300 ns |
Min Input Voltage |
-16V |
Slew Rate |
1 V/μs |
Amplifier Type |
COMPARATOR |
Common Mode Rejection Ratio |
80 dB |
Max Input Voltage |
80V |
Bandwidth |
500 kHz |
Sensing Method |
High-Side |
Voltage Gain-Nom |
20 |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
INA200AIDGKR Overview
There is an inclusion of buck boost converter in the package Tape & Reel (TR).8-TSSOP, 8-MSOP (0.118, 3.00mm Width) is the way in which voltage regulator is packaged.Mounted by Surface Mount, this current regulator is a semiconductor.Temperatures should not exceed -40°C~125°C during operation.The input voltage of -16V~80V can be supported by this voltage regulator.In addition to the 8 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.Among the INA200 family of products.Several pronged contacts are used in computer interfaces as 8 pins.This current regulator is mounted by Surface Mount.In order for the constant current to work, it should be powered by a 12VV power source, which is found in most 12VV power supplies.Channels are becoming stronger/weaker based on the following statistics: 1.The maximum voltage of 18V that can be supplied to the buck boost converter is supported.The current regulations of this part are included in a part that is named Operational Amplifier.This buck boost converter is designed to operate with a minimal supply voltage of 2.7V as its input voltage.This electrical buck boost converter has a COMPARATOR amplifier type.1.85mA is the operating supply current provided for its operation.In order to maintain high efficiency, it is recommended that the supply voltage be maintained at 12V.Its maximum input voltage ensures that 80V offers maximum design power converter flexibility due to its maximum input voltage.With 5mA's maximal supply current, there is a great deal of current regulator's design flexibility.Due to -16V's minimal input voltage, it offers maximum design flexibility.
INA200AIDGKR Features
Tape & Reel (TR) package
INA200 family
The maximal supply voltage of 18V
INA200AIDGKR Applications
There are a lot of Texas Instruments INA200AIDGKR Current Regulation/Managements applications.
- Battery chargers
- Over current monitor
- Current sensing
- Industrial applications current measurement
- Over-current protection
- DC-to-dc converters
- Motor controls
- Automotive current measurement
- Battery management
- Engine management